Chapter 3
text is saved to main memory. The information stored in memory will be used to restore the PC to the previous state when an “wake up” event occurs.
Run VGABIOS if S3 Resume
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM) sleep state. Setting options: Auto, Yes, No.
PowerManagement
This item is used to select the degree (or type) of power saving and is related to these modes: Suspend Mode and HDD Power Down. There are three op- tions for power management:
User Define Allows end users to configure each mode separately. Min Saving Minimum Power Management. Suspend Mode = 1 Hour,
and HDD Power Down = 15 Min.
Max Saving Maximum Power Management. Suspend Mode = 1 Min, and HDD Power Down = 1 Min.
VideoOffMethod
This determines the manner in which the monitor is blanked.
Blank Screen | This option only writes blanks to the video buffer. |
V/H SYNC+Blank | This selection will cause the system to turn off |
| the vertical and horizontal synchronization ports |
DPMS | and write blanks to the video buffer. |
Initial display power management signaling. |
Video Off In Suspend
This setting determines whether the monitor will be turned off during suspend mode. Setting options: Yes, No.
SuspendType
This setting allows you to select the type of Suspend mode. Setting options: Stop Grant (saves the state of the entire system to disk and then powers off the system), PwrOn Suspend (the CPU and core system remain powered on in a very
ModemUseIRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
