Premio Computer Premio Computer system manual IrDA Infrared Module Connector JIR1

Chapter 2

IrDA Infrared Module Connector: JIR1

This connector allows you to connect to an IrDA Infrared module. You must configure the setting through the BIOS setup to use the IR function.

1

JIR1

Pin	Signal
1	VCC
2	NC
3	IRRX
4	GND
5	IRTX

Chassis Intrusion Switch Connector: JCI1

The connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.

JCI1

2-20