AWARD® BIOS Setup
computer. When setting the item to Enabled, BIOS will shorten or skip some check items during POST. Setting options: Enabled, Disabled.
First/Second/Third Boot Device
The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. The settings are:
Floppy | The system will boot from floppy drive. |
LS120 | The system will boot from |
The system will boot from the first HDD. | |
SCSI | The system will boot from the SCSI. |
CDROM | The system will boot from the |
The system will boot from the second HDD. | |
The system will boot from the third HDD. | |
The system will boot from the fourth HDD. | |
ZIP100 | The system will boot from ATAPI ZIP drive. |
The system will boot from the USB FDD. | |
The system will boot from the USB ZIP drive. | |
The system will boot from the USB | |
The system will boot from the USB HDD. | |
LAN | The system will boot from the Network drive. |
Disabled | Disable this sequence. |
Boot Other Device
Setting the option to Enabled allows the system to try to boot from other device if the system fails to boot from the First/Second/Third boot device.
Swap FloppyDrive
Setting to Enabled will swap floppy drives A: and B:.
Boot Up Floppy Seek
Setting to Enabled will make BIOS seek floppy drive A: before booting the
system. Settings: Disabled and Enabled.
Boot Up NumLock Status
This setting is to set the Num Lock status when the system is powered on. Setting to On will turn on the Num Lock key when the system is powered on. Setting to Off will allow users to use the arrow keys on the numeric keypad. Setting options: On, Off.