| V . C O M F O R T A D J U S T M E N T S | |||
To change the armrest width: |
|
| ||
1. | Locatethearmrestknoboneachsideofthearmrestreceiver |
|
| |
| bracket. See figure 18. |
|
| |
2. | Loosen each knob. |
|
| |
3. | Slide the armrests in or out to the desired width. |
|
| |
4. | Tighteneachknob. | FOOT |
| |
|
| PLATFORM | QUICK RELEASE | |
Armrest Angle Adjustment | BRACKET | |||
FASTENERS | ||||
| ||||
To change the armrest angle: |
|
| ||
1. | Lift the armrest straight up so that it is perpendicular to the |
|
| |
| floor.Seefigure18. |
|
| |
2. | Loosen the jam nuts. |
|
| |
3. | Turnthearmrestangleadjustingscrewclockwisetoraisethe |
|
| |
| frontofthearmrest,or counterclockwisetolowerthefrontof |
|
| |
| thearmrest. |
|
| |
4. | Tightenthejamnutstolockthearmrestangleadjustingscrew |
|
| |
| intoplace. |
|
| |
Foot Platform Height Adjustment | Figure 19. Foot Platform Adjustment |
| ||
The foot platform height is easily adjusted to different heights |
|
| ||
in |
|
| ||
To raise or lower the foot platform:
1.Remove the quick release fasteners from the foot platform bracket. See figure 19.
2. | Raise or lower the foot platform to the desired height. |
| CAM | |
BOLT | NUT | |||
3. | Reinstall the quick release fasteners into the foot platform |
| ||
| bracketandtighten. |
|
| |
Foot Platform Depth Adjustment |
|
| ||
To adjust the foot platform depth: |
|
| ||
1. | Remove the quick release fasteners from the foot platform |
|
| |
| bracket. See figure 19. | LEVER (OPEN) | LEVER (FULLY CLOSED) | |
2. | Move the foot platform in or out to the desired depth. | |||
UNCLAMPED | CLAMPED | |||
3. | Reinstall the quick release fasteners into the foot platform |
|
| |
| bracketandtighten. | Figure 20. Quick Release Fastener Operation | ||
|
| |||
Quick Release Fasteners
The foot platform is attached to the power base with two quick release fasteners. See figure 19. Each quick release fastener consists of a bolt, a lever, and a nut. See figure 20. The lever has a cam on the end that allows it to clamp into place. The quick release fastener has two states: clamped and unclamped. When the lever is open, the quick release fastener is unclamped. When the lever is closed, the quick release fastener is clamped.
26 | www.pridemobility.com | Jazzy 1107 |
