Pride Mobility 1107 owner manual Swing-away Footrests, Elevating Leg Rests, Multi-Axis Foot Plates

	V . C O M F O R T A D J U S T M E N T S
Swing-away Footrests
Swing-away Footrests (SFRs) enable you to rotate the			RELEASE LEVER A
footrests to the side before you transfer onto or off of
your power chair.			RELEASE LEVER B
		LEG REST
To rotate the SFRs:		EXTENSION
1. Push in the release lever. See figure 23.
2.	Rotate the SFRs.		ADJUSTMENT
			SCREWS
To adjust the SFR length:
1.	Remove the two adjustment screws from the side of each
	footrestextension.Seefigure23.
2.	Slide the footrest up or down to the desired length.	Figure 24. Elevating Leg Rests
3. Reinstallthetwoadjustmentscrews.

Elevating Leg Rests

Elevating Leg Rests (ELRs) offer an infinite range of ad- justment for the leg angle and a footrest adjustment range of 12–19 in.

A

B

To rotate the ELRs:

1. Push in release lever A. See figure 24.

2. Rotate the ELRs.

C

D

To adjust the ELR length:

1.Removethetwoadjustmentscrewsfromthesideof eachleg rest extension. See figure 24.

2. Slide the leg rest up or down to the desired length.

3. Reinstallthetwoadjustmentscrews.

To adjust the ELR angle:

1. Push down release lever B. See figure 24.

2. Move the leg rest to the desired angle.

Multi-Axis Foot Plates

The multi-axis foot plate assembly can be installed on either a swing-away footrest or an elevating leg rest. The multi-axis foot plate has four adjustments: leg rest length (A), position (B), tilt (C), and angle (D). See figure 25.

To change leg rest length (A):

1.Remove the hardware.

2.Move the leg rest to the desired position.

3. Reinstall the hardware.

SETSCREW LOCATION

Figure 25. Multi-Axis Foot Plate (ELR Shown)

28 www.pridemobility.com Jazzy 1107