V I . C O M F O R T A D J U S T M E N T S
After you have had your Jazzy for an extended period of time, you may find the need to make a few adjustments. Some of these adjustments may degrade your Jazzy’s performance by changing its center of gravity.
WARNING If your Jazzy was configured at your authorized Pride provider, please consult your healthcare professional before changing the seat position or making any other adjustment. Some adjustments may degrade your Jazzy’s performance and safety by changing its center of gravity.
SEAT HEIGHT AND SEAT ANGLE
You can change the seat height by raising or lowering the seat towers. You can change the seat angle by raising or lowering either the front two towers or the back two towers only.
To change the seat height:
1.Remove the seat.
2.Remove the ball detent pins in each of the four seat posts. You may need to remove the battery cases to access one or more of these pins. See VII. “Disassembly.”
3.Move the seat posts to desired height and reinsert ball detent pins.
4.If you wish to change the seat angle, change the height of only one set (either front or back) of seat towers.
5.Reinstall the seat.
To change the seat angle:
1.Remove the seat hinge bolts with a
2.Adjust seatback to desired angle and reinsert the seat hinge bolts.
3.Tighten bolts with the hex key and wrench.
Figure 7. Seat Angle
Figure 8. Seatback Release Lever Option
SEATBACK RELEASE LEVER OPTION
If your Jazzy is equipped with a reclining seat, you can adjust the seatback angle.
To adjust the seatback angle:
1.Press down on the seatback release lever. See figure 8.
2.Move the seatback down or up to the desired position.
3.Release the seatback release lever.
ARMREST WIDTH
To change the armrest width:
1.Locate the two knobs on the armrest receiver bracket. See figure 9.
2.Loosen the knobs. Slide the armrests in or out for desired width.
3.Retighten the knobs.
ARMREST ADJUSTMENT KNOBS
Figure 9. Armrest Width
Jazzy 1105/RevH/Feb03 | www.pridemobility.com | 21 |
