V . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, throttle control lever, battery condition meter, running lights switch, hazard light switch, power seat switch, turn signal but- tons, status LED, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console does become exposed to moisture, do not attempt to operate your scooter until the tiller console has dried thoroughly.
BATTERY CONDITION METER | SPEED ADJUSTMENT DIAL | |
STATUS LED | HAZARD LIGHT SWITCH | |
| ||
KEY SWITCH | HORN BUTTON | |
RUNNING LIGHT |
| |
SWITCH | TURN SIGNAL BUTTON (RIGHT) | |
TURN SIGNAL BUTTON (LEFT) | ||
| ||
HORN BUTTON |
| |
THROTTLE CONTROL |
| |
LEVER (REVERSE) |
| |
| THROTTLE CONTROL LEVER | |
(FORWARD) | ||
POWER SEAT SWITCH |
|
Figure 5. Tiller Console
Key Switch
νInsert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
νTurn the key counterclockwise to power down (turn off) your scooter.
WARNING! If the key is moved to the off position while your Sundancer is in motion, the electronic brakes will engage and your Sundancer will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed you preset with the speed adjustment dial.
νPlace your right hand on the right handgrip and your left hand on the left handgrip.
νUse your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forward.
νRelease the lever and allow your scooter to come to a complete stop before pushing the other side of the lever to move in reverse.
νWhen the throttle is completely released, it automatically returns to the center “stop” position and engages your scooter’s brakes.
Sundancer | www.pridemobility.com | 17 |
