Pride Mobility SC2000PS owner manual What type and size of battery should I use?

V I . B A T T E R I E S A N D C H A R G I N G

How can I get maximum range or distance per charge?

Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves. You will often face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of these driving conditions affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maximum range per battery charge.

νAlways fully charge your scooter’s batteries prior to your daily use.

νMaintain proper pressure in all of your scooter’s tires (if equipped with pneumatic tires).

νPlan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.

νLimit your baggage weight to essential items.

νTry to maintain an even speed while your scooter is in motion.

νAvoid stop-and-go driving.

What type and size of battery should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep-cycle batteries that are similar in performance. Do not use wet-cell batteries, which have removable caps.

NOTE: Sealed batteries are not serviceable. Do not remove the caps.

WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

How do I change a battery in my scooter?

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.

1.Remove the seat and the rear shroud. See IX. “Disassembly and Assembly.”

2.Disconnect the battery strap.

3.Disconnect the battery harness. See figure 14.

4.Disconnect the battery cables from the battery terminals.

5.Remove the old battery.

6.Place a new battery in the battery well.

7.Connect the red battery cable to the positive (+) battery terminal.

8.Connect the black battery cable to the negative (-) battery terminal.

9.Reconnect the battery harness to the rear electronics module.

10.Reconnect the battery strap.

11.Reinstall the rear shroud and seat.

NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized Pride Provider for instructions on disposal. Your authorized Pride Provider will also have the necessary information on battery recycling, which is our recommended course of action.

Why do my new batteries seem weak?

Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium batteries (nicads), or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down their charge, and then accept a relatively quick recharge.

Sundancer www.pridemobility.com 23