I X . D I S A S S E M B LY A N D A S S E M B LY

DISASSEMBLY

You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the basket, and the batteries. No tools are required to disassemble or assemble your scooter, but keep in mind that the disassembled sections of the scooter take up more floor space than the assembled unit. Always disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move around your scooter—about 5 feet in all directions. Remember that some scooter components are heavy and you may need assistance when lifting them.

WARNING! Lifting weight beyond your physical capability may result in personal injury. Ask for assistance when necessary while disassembling or assembling your scooter.

1.Place the manual freewheel lever in the drive (up) position.

2.Coil the charger power cord and store it for future use.

3.Pull up on the seat lock lever and lift the seat straight up and off the scooter. See figure 11.

4.Gently pull the shroud away from the frame and lift it off of the scooter. See figure 12.

5.Disconnect the battery straps.

6.Unplug both black and white 2-pin battery harnesses. See figure 13.

7.Unplug the front-to-rear harness that connects the tiller console to the rear electronics module. See figure

14.

WARNING! Failure to unplug both battery harnesses and the front-to- rear harness prior to separating the front and rear sections could result in permanent damage to the scooter.

SEAT LOCK LEVER

Figure 11. Seat Removal

Figure 12. Rear Shroud Removal

BATTERY STRAPS

BATTERY HARNESSES

Figure 13. Battery Harnesses

30

www.pridemobility.com

Sundancer

Page 30
Image 30
Pride Mobility SC2000PS owner manual D I S a S S E M B LY a N D a S S E M B LY, Disassembly