V . Y O U R V I C T O R Y X L - 4

REAR SHROUD

The rear shroud is a removable plastic piece that protects the rear section and its subcomponents. In order to remove the rear shroud, you must first remove the seat from your scooter and then lift the rear shroud gently until it disengages from the reusable fasteners holding it in place. Finally, disconnect the rear light harnesses to fully remove the rear shroud.

REAR SECTION

The batteries, electronic controller module, motor/transaxle assembly, manual freewheel lever, the anti-tip wheels, the main circuit breaker, and the fuses (not shown) are located on the rear section of your scooter. See figure 9.

Batteries

The batteries store the electrical energy that powers your scooter. For instructions on charging your batter- ies, see VI. “Batteries and Charging.”

BATTERIES

ELECTRONIC CONTROLLER MODULE

AMMETER

MAIN CIRCUIT BREAKER (RESET BUTTON)

MOTOR/

TRANSAXLE

ASSEMBLY

BATTERY CHARGER

CHARGER POWER CORD RECEPTACLE

MANUAL

FREEWHEEL

LEVER

ANTI-TIP WHEELS

Figure 9. Rear Section

22

www.pridemobility.com

Victory XL-4/RevC/June03

Page 22
Image 22
Pride Mobility SC2700 owner manual Rear Shroud, Rear Section, Batteries