V I . B A T T E R I E S A N D C H A R G I N G

BATTERY REPLACEMENT

To change a battery in your scooter:

WARNING! Batter y posts, terminals, and related accessories contain lead and lead compounds. Wash hands after handling.

REAR LIGHTING HARNESSES

1.

Power down your scooter and remove the key.

2.

Remove the seat.

3.

Gently lift the rear shroud off of your scooter

 

high enough to be able to disconnect the rear

 

lighting harnesses. See figure 12.

4.

Disconnect the battery tie-down strap.

5.

Disconnect the battery harness from the battery

 

harness mating plug. See figure 12A.

6.

Disconnect the battery cables from the battery

 

terminals.

Figure 12. Disconnect Lighting Harnesses

BATTERY HARNESS MATING PLUGS

7.

Remove the old battery.

8.

Place a new battery in the battery well.

9.

Connect the red battery cable to the positive (+)

 

battery terminal.

10.

Connect the black battery cable to the negative

 

(-) battery terminal.

11.

Reconnect the battery harness to the battery har-

 

ness mating plug. See figure 12A.

FRONT-TO-REAR HARNESS

BATTERY HARNESSES

12.

Reconnect the battery tie-down strap.

13.

Reconnect the rear lighting harnesses.

14.

Reinstall the rear shroud and the seat.

Figure 12A. Disconnect Battery Harnesses

BATTERY DISPOSAL AND RECYCLING

If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your autho- rized Pride Provider for instructions on disposal. Your authorized Pride Provider will also have the neces- sary information on battery recycling, which is our recommended course of action.

FREQUENTLY ASKED QUESTIONS (FAQS)

How does the charger work?

When battery voltage is low, the charger works harder and sends more electrical current to the batteries to bring up their charge. As battery voltage approaches a full charge, the charger sends less electrical current to the batteries. When the batteries are fully charged, the current sent from the charger is at nearly zero amperage. Therefore, when the charger is plugged in, it maintains the charge on your batteries but does not overcharge them. We do not recommend that you charge your batteries for more than 24 consecutive hours.

Can I use a different charger?

For the safest, most efficient, and balanced charging of the batteries, you should simultaneously charge both batteries using only the manufacturer-supplied onboard battery charger.

26

www.pridemobility.com

Victory XL-4/RevC/June03

Page 26
Image 26
Pride Mobility SC2700 owner manual Battery Replacement, Frequently Asked Questions Faqs, How does the charger work?