X I . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your ability to perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride Provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
νIf equipped with pneumatic tires, always maintain a proper
WARNING! It is important that
νRegularly inspect your scooter’s tires for signs of wear.
EXTERIOR SURFACES
Bumpers, tires, and trim can benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat, flooboard, or tire tread. They will become dangerously slippery and result in personal injury and/or damage to your scooter.
BATTERY TERMINAL CONNECTIONS
νMake certain that the terminal connections remain tight and uncorroded.
νThe batteries must sit flat in the battery wells.
νThe battery terminals should face the rear of the scooter.
WIRING HARNESSES
νRegularly check all wiring connections.
νRegularly check all wiring insulation, including the charger power cord, for wear or damage.
νHave your authorized Pride Provider repair or replace any damaged connector, connection, or insula- tion that you find before using your scooter again.
ABS PLASTIC SHROUDS
νThe front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are coated with an advanced formula urethane paint.
νA light application of car wax will help the shrouds retain their high gloss.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi- cally for wear by your authorized Pride Provider.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
You do not need to lubricate these items, as they are all prelubricated and sealed
Victory | www.pridemobility.com | 39 |
