Pride Mobility SC340, SC300 owner manual Call your authorized Pride provider

I I I . E M I / R F I

Are all electric Scooters susceptible to EMI/RFI?

Each make and model of electric Scooter differs in its ability to resist EMI/RFI. Every Scooter has a particular level of resistance to EMI/RFI. This resistance is measured in volts per meter (V/m). A higher resistance level offers greater protection against EMI/RFI. In other words, an electric Scooter with a high resistance level is less likely to be affected by a strong radio source than is an electric Scooter with a low resistance level.

What is the FDA doing about the problem?

The FDA has written to electric Scooter manufacturers and requested that those manufacturers test their new Scooter models to be certain that they provide a reasonable degree of resistance against EMI/RFI. The FDA has stated that all newly manufactured electric Scooter models should have a resistance level of at least 20 V/m. This level of resistance provides a reasonable degree of protection against the common sources of EMI/RFI.

The FDA has also requested or recommended that:

νElectric Scooter manufacturers clearly label new products with their resistance level or state that the resistance level is not known.

νThe labeling or informational material supplied with new electric Scooters must explain what the resistance level means and warn users about the possibility of EMI/RFI and how to avoid it.

νElectric Scooter manufacturers undertake an educational program to inform electric Scooter users and their caregivers about the problems associated with EMI/RFI and about the actions they can take to minimize the risk of EMI/RFI.

νWhile there is no exact way to tell if your Scooter is totally safe, an immunity level of 20 V/m (May 1994) is generally achievable and useful. This product has been tested and passed at an immunity level of 20 V/m.

What can I do to find out if my Scooter is likely to be affected by EMI/RFI?

If you have had your Scooter for some time and have not experienced any unintended motion, it is not likely that you will have a problem in the future. However, it is always possible that EMI/RFI problems could arise if you are close to a source of radio waves. Therefore, it is very important for you to be alert to this possibility. The Scooter meets or exceeds a resistance level of at least 20 V/m.

What can I do to reduce the risk of my Scooter being affected by EMI/RFI?

Here are some precautions you can take:

νDo not turn on or use hand-held personal communications devices, such as citizens band (CB) radios and cellular phones, while your Scooter is turned on.

νBe aware of nearby radio wave transmitters, such as radio or TV stations and hand-held or mobile two- way radios. Try not to operate your Scooter too close to those transmitters. For example, if you are on an electric Scooter with a resistance level of at least 20 V/m, you should remain at least three feet from a hand-held two-way radio and at least ten feet from a mobile two-way radio.

νBe aware that adding accessories and/or components, or modifying your Scooter in any way, may change its EMI/RFI resistance level and may make it more susceptible to interference from radio wave sources.

What should I do if my Scooter moves unexpectedly?

If unintended motion or unintended brake release occurs, turn off your Scooter (by removing the key) as soon as it is safe to do so.

If my Scooter moves unintentionally, where should I report the incident?

Call your authorized Pride provider.

16 Legend