Assembly | Pride Mobility SC300, SC340 manual

I X . D I S A S S E M B LY A N D A S S E M B LY

ASSEMBLY

1.Push the manual freewheel lever in the drive (down) position.

2.Position the front and rear sections next to each other.

3.Tilt the rear end to a horizontal position, insert the longer tube of the front end into the rear section first, and make sure that the frame locking levers are vertically positioned and the locking pins are removed.

4.Slide the two sections of the unit together until the front half reaches its insertion limit.

5.Secure the front and rear sections with ball detent pins.

6.Push the frame lock levers back to their locked (downward) position.

7.Join the large, white, 9-pin front-to-rear harness. The two orange dots present on both harnesses should be adjacent to each other and enable quick plug mating.

8.Put the batteries in place and plug the 2-pin battery harnesses into the adjoining harnesses that extend from the electronic controller assembly.

9.To reinstall the utility tray if it has been removed, be sure the tray is firmly pressed down on the reusable fasteners that holds it to the Scooter, then reconnect the black 6-pin motor harness.

10.Carefully lower the rear shroud over the seat pedestal and down into place. Make sure the rear plastic shroud does not make any contact with the rear wheels.

11.Carefully lift the seat and slide the small seat post (on the seat bottom) into the seat pedestal.

12.Rotate the seat until it locks into place.

Legend

35

Image 35

Pride Mobility SC300, SC340 owner manual Assembly

Contents

Read everything This manual Before operating Your Scooter Ultimate In Style & Performance F E T Y G U I D E L I N E S N T E N T S Information Exchange N T R O D U C T I O N My Authorized Pride Provider Is Modifications S a F E T YGeneral Incline Information PRE-RIDE Safety CheckWeight Limitations ˚ 6˚ 5˚ Normal Driving Position Cornering Information Stationary Obstacles STEPS, CURBS, ETC Braking InformationOutdoor Driving Surfaces Tire Inflation LIFT/ELEVATION Products Stairs and EscalatorsDoors Elevators Positioning Belts Motor Vehicle TransportGetting Onto and OFF of Your Scooter Removable Parts Reaching and BendingPrescription DRUGS/PHYSICAL Limitations Alcohol EMI/RFI Warnings I . E M I / R F Call your authorized Pride provider Specification S Model Numbers Body Color Length Width Tires Weight Capacity O U R L E G E N D Control Console Assembly Batter Condition Meter Key SwitchSpeed Adjustment Dial Throttle Control Lever Batteries Onboard Battery ChargerElectronic Controller Assembly Rear Section Anti-Tip Wheels Motor/Transaxle AssemblyManual Freewheel Lever Charging Your Batteries Reading Your Battery VoltageB a T T E R I E S a N D C H a R G I N G Can I use a different charger? Batteries and CHARGING-FREQUENTLY Asked Questions FaqsHow does the charger work? What if my Legend’s batteries won’t charge? How can I get maximum range or distance per charge? How can I ensure maximum battery life? Why do my new batteries seem weak? What about public transportation? How should I store my Legend and its batteries? I . O P E R a T I O N Getting OFF of Your Legend I I . C O M F O R T a D J U S T M E N T S Tiller Angle AdjustmentSeat Height Adjustment FRONT-TO-BACK Seat Adjustment Armrest Height Adjustment Armrest Width Adjustment Power Seat Actuator Optional Seatback Adjustment D I S a S S E M B LY a N D a S S E M B LY Disassembly Disconnecting the FRONT-TO-REAR Harness Assembly P T I O N a L a C C E S S O R I E S What if the motor runs but my Legend does not move? B a S I C TroubleshootingWhat if all the systems on my Legend seem to be dead? I . C a R E a N D M a I N T E N a N C E Warranty Exclusions THREE-YEAR Limited WarrantyTHREE-YEAR Warranty Exceptions ONE-YEAR Limited Warranty I I . W a R R a N T Y T E S T E S