I V . B A T T E R I E S A N D C H A R G I N G
What type and size of battery should I use?
Your Travel Scooter requires two deep cycle batteries. We recommend only sealed,
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel- Cell batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
How do I change a battery in my Travel Scooter?
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp- hour (Ah) capacity. Refer to the specifications table in this manual and in the manual supplied with the battery charger for recommended type and capacities.
WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.
WARNING! Contact your Pride Provider if you have any questions regarding the batteries in your Travel Scooter.
WARNING! Do not replace the batteries while the Travel Scooter is occupied.
WARNING! The batteries on your Travel Scooter should only be serviced or replaced by an authorized Pride Provider or a qualified technician.
1.Remove the battery pack from the Travel Scooter.
2.Carefully turn the pack upside down.
3.Remove the eight (8) screws from the perimeter of the battery pack.
4.Carefully turn the pack right side up and remove the lid.
5.Disconnect the black
6.Remove the old batteries.
7.Place the new batteries in the battery pack.
8.Connect the red battery cables to the positive (+) battery terminals of each battery.
9.Connect the black battery cables to the negative
BATTERY TERMINAL |
BATTERY |
CABLES |
Figure 15. Battery Replacement
24 | www.pridemobility.com | Elite Traveller Plus/Plus HD |
