Pride Mobility Traveller Plus V I . C O M F O R T A D J U S T M E N T S, Tiller Angle Adjustment

Models: Traveller Plus HD

1 43
Download 43 pages 23.08 Kb
Page 28
Image 28
V I . C O M F O R T A D J U S T M E N T S

V I . C O M F O R T A D J U S T M E N T S

TILLER ANGLE ADJUSTMENT

WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the Travel Scooter is in motion.

Your Travel Scooter is equipped with an adjustable pivoting tiller.

1.While supporting the tiller, turn the tiller adjustment knob counterclockwise to loosen the tiller. See figure 16.

2.Move the tiller to a comfortable position.

3.Turn the tiller adjustment knob clockwise to secure the tiller in position.

NOTE: In order to fully lower the tiller, you must first remove the seat and battery pack. Remove the seat by pulling it straight up and off of the Travel Scooter.

SEAT ROTATION ADJUSTMENT

The seat rotation lever will secure the seat into several positions.

1.Pull up on the seat rotation lever. The lever is located on the right side of the seat. See figure 17.

2.Rotate the seat to the desired position.

3.Release the lever to secure the seat into place.

ARMREST WIDTH ADJUSTMENT

The armrest width can be adjusted inward or outward.

1.Loosen the armrest adjustment knobs. See figure 17.

2.Remove the detent pins.

3.Slide the armrests in or out to the desired width.

4.Align the adjustment holes on the seat frame and armrest, then reinsert the detent pin.

5.Tighten the armrest adjustment knobs.

NOTE: Pivot the armrests upward to aid in getting onto and off of your Travel Scooter.

TILLER ADJUSTMENT

KNOB

Figure 16. Tiller Adjustment Knob

 

SEAT ROTATION

 

LEVER

DETENT PIN

ARMREST ADJUSTMENT KNOB

Figure 17. Seat Adjustments

28

www.pridemobility.com

Elite Traveller Plus/Plus HD

Page 28
Image 28
Pride Mobility Traveller Plus V I . C O M F O R T A D J U S T M E N T S, Tiller Angle Adjustment, Seat Rotation Adjustment