TOC | INDEX |
G. REPLACING THE PRINTHEAD
Regular replacement of the printhead is not necessary. However it may become necessary if you notice a gradual decrease in print quality or if some of the print nozzles are still clogged after repeated manual cleanings as described in Section 5F.
Follow this procedure:
1.Press the Pause and Load/Feed buttons simultaneously to move the print carriage to the center of the print area.
| Pause |
Power |
|
| Load/ |
Ink | Feed |
| |
| Unload |
Press Pause + Load/Feed to Start and Finish.
2.Remove all cartridges. Press the release tab at the front of the carriage to release the latch.
Troubleshooting and Maintenance 51
