RFID CONTROL Menu Items

Tag Write Cnt

This menu item displays on the control panel’s LCD the number of tags written since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Failed Tag Cnt

This menu item displays on the control panel’s LCD the number of failed tag write attempts since the last Clear Tag Stat operation has been initiated. (See “Clear Tag Stat” below.)

Clear Tag Stat

This menu item clears the Tag Write Cnt and Failed Tag Cnt menu items.

F/W-Version

This menu item displays on the control panel’s LCD the reader firmware version.

Precheck Tags

NOTE: This menu item applies to Class 1 tags only.

When this menu item is set to Enable, the RFID encoder checks the tags for a pre-programmed quality code. If the code is absent, the tag immediately fails and the selected Error Handling mode is performed (Overstrike, None, or Stop). The default is Disable.

Overstrike Style

This menu item selects the style of the overstrike pattern. The default is Grid.

When it is set to Grid, a grid pattern prints when it overstrikes. When it is set to Error Type Msg, an error message prints that indicates which error occurred (see Table 1).

19

Page 19
Image 19
Printronix SL5000e manual Tag Write Cnt, Rfid Control Menu Items