Chapter 2 RFID PGL Commands
datafield The static data of this static field. It is a mandatory parameter of bit field with static data.
IIdentifies this field is an incremental bit field.
STEP | Specifies that the incremental data field will use the |
| step method. Enter STEP;. The STEP option replaces |
| the STEPMASK option that is used in Alpha and |
| Barcode. |
idir | Enter a plus sign (+) or leave the field blank to |
| increment (default). Enter a minus sign |
| decrement. |
step | A decimal number specifies the amount to increment/ |
| decrement each time the form is executed. The |
| increment is at bit level and will automatically wrap |
| based on the field size. |
RPTn | The optional incremental repeat count parameters to |
| specify the number of times a particular field value is |
| repeated before it is incremented. The default repeat |
| count parameter n is 1, which will increment the field |
| value each time it prints. The repeat count can range |
| from 1 to 65535. |
RSTn | The optional incremental reset count parameter to |
| specify the number of times an incremented field is |
| printed before it is reset to the starting value. By |
| default, there is no reset count. The reset count |
| parameter n can range from 1 to 65535. |
value | Defines the value of the field or the starting value of the |
| incremented field. If the field is dynamic, the value will |
| be specified later in the EXECUTE mode. The data |
| must be specified within a pair of delimiters (D). The |
| delimiter (D) cannot be a “/” or SFCC character since |
| the “/” will comment out the rest of the line and SFCC is |
| reserved for PGL commands. If “R” or “S” is used as |
| delimiters, the data pattern must not comprise of the |
| keywords in the incrementing options. Since the |
| delimiters could be different from one value to another, |
| proper care must be taken to avoid one of the letters |
| mentioned above. |
26
