Printronix SL5000e manual Rfid PGL Commands

Chapter 2 RFID PGL Commands

RFID PGL Commands

IMPORTANT For all examples make sure Label Length in the QUICK SETUP menu matches the physical length of the installed media.

RFWTAG

Purpose The RFWTAG command is used to program an RFID tag (embedded in a smart label) using structured data format. The data structure of an RFID tag can consist of one or more bit fields. Each bit field specifies its own field length, the data format, the field type plus additional options if the type is incremental, and finally the field value.

Mode CREATE

Format RFWTAG;[LOCKn;]size

(Bit Field)+

STOP

RFWTAG	Specifies the RFWTAG command, enter
	RFWTAG;
LOCKn	Optional parameter specifies that the
	data should be protected from being
	overwritten later. By default the data are
	not protected. The acceptable values for
	n are 1 to 255, meaning the data are to
	be protected using this byte as the LOCK
	password.
size	A decimal number specifying the overall
	bit length of the RFID tag.
Bit Field	A line description of a bit field and must
	have one of the following syntax formats:
	1. For non-incremental data (both static
	and dynamic)
	length;[DFn;]format;(D)datafield(D)
	2. For incremental fixed data
	length;I;format;STEP[idir]step;[RPTn;]
	[RSTn;](D)startdata(D)

24