Printronix SL5000e manual

Models: SL5000e

1 52
Download 52 pages 36.87 Kb
Page 32
Image 32

Chapter 2 RFID PGL Commands

END ~EXECUTE;SGTIN–64;ICNT1500 ~IDF1;STEP+1;*0* ~IAF1;<DF2>

~NORMAL

NOTE: 1. The <IDF1> usage does not increment the DF1 field. It merges the DF1 content into the AF1 field, keeping the same representation previously defined for IDF1.

2.The use of IAF1 is to print alpha on every label. If AF1 is used instead, only the first label is printed. The AF1 field is not incremented either since it is using the result from the DF1 merge.

VERIFY

Purpose Request the printer to send to the host the ASCII representation of a dynamic field. The dynamic field could be one of AFn, BFn, or DFn, but cannot be RFn.

Mode CREATE

Format VERIFY;field;format;(D)ASCIIheader(D)

VERIFY

The command to verify data of a dynamic

 

field, enter VERIFY;

field

The dynamic field AFn, BFn, or DFn that

 

contains the data to be sent to the host.

format

A letter specifying the format of the

 

outgoing data to be sent to the host.

 

B – binary, D – decimal, H

 

hexadecimal, S – string

 

Based on the incoming format of the data

 

field, a format conversion may be

 

performed if the outgoing format is not

 

the same. The AFn and BFn format is

 

always S type. The DFn format could be

 

either B, D, or H. Due to the possible

 

conversion the outgoing data stream

 

could be longer than the incoming one.

32

Page 32
Image 32
Printronix SL5000e manual