OPERATING HEATER

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

A. This appliance has a pilot which must be lighted by control system, When lighting the pilot, follow these instructions exactly .

B. BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS SEE WARNING in Page 1 for proper instructiors.

C.Use only your hand to push in control knob. Never use tools. If the the appli ance could not operate , don't try to repair it, Call a qualified service technician or gas supplier.Forced or at- tempted re-pair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Imme- diately call a qualified service techni- cian to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

TO TURN OFF GAS TO APPLIANCE Shut off heater

1. Press the IGN/OFF button of transmitter.

2.Set the Switch on OFF location.(See Figure12-2)

Shutting off burner only( pilot stay lit) 1.press the BURNER to set flame OFF select

Figure 12-1 Emergency Button location

If you didn’t receive or mis-place your remote transimitter,you can press the emergency button by a pitch rod to operate remote automatically on or off (see fig 12-2)

Figure 12-2On/Off Switch

OPERATING INSTRUTIONOF

REMOTE-CONTROLLEDBUNER

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information, page 2.

2.Make sure equipment shutoff valve is fully open.

NOTICE: During initial opera- tion of new fireplace, burning logs will give off a paper-burning smell. Orange flame will also be present. Open a window to vent smell. This will only last a few hours.

CAUTION: Do not try to adjust heating levels by using the equipment shutoff valve.

Fig 13 Front of the Transmitter

1 1

Page 10 Page 12
Page 11
Image 11
Procom QL300RYLA-W Operating Heater, For Your Safety Read Before Lighting, To Turn OFF GAS to Appliance Shut off heater
Page 10 Page 12

QN300RYLA-W, QN300RYLA, QL300RYLA, QL300RYLA-W specifications

The Procom QN300RYLA-W, QN300RYLA, QL300RYLA-W, and QL300RYLA are advanced antenna solutions designed for diverse communication needs. These models exemplify cutting-edge technology and innovative design, catering to clients in various sectors, from telecommunications to public safety.

One of the standout features of the Procom antennas is their robust frequency range. The QN300RYLA-W and QN300RYLA models typically support a frequency range of 300 to 470 MHz, while the QL300RYLA-W and QL300RYLA operate in the same bandwidth, providing flexibility for various applications. This capability ensures compatibility with a broad array of devices, enhancing communication reliability.

Procom’s design philosophy emphasizes durability and performance. The antennas are constructed with high-quality materials that can withstand a wide range of environmental conditions. With their weather-resistant properties, these antennas can be deployed in challenging regions, ensuring continuous operation in rain or shine.

The gain characteristics of the antennas are optimized for long-range communication. With gains typically reaching up to 6 dBi, they provide enhanced signal strength and coverage, crucial for critical communications. This is particularly beneficial in urban environments where signal degradation often occurs due to physical obstructions.

Another significant aspect of the Procom QN and QL series is their installation versatility. They can be mounted in different configurations, including vertical or horizontal setup, adapting to specific user requirements and site conditions. This flexibility allows for streamlined deployment in various settings, including rooftops, towers, and vehicles.

These antennas also integrate advanced radiation patterns, which help minimize interference and improve overall performance. This ensures reliable transmission over considerable distances, making them ideal for applications in emergency services, transportation logistics, and industrial communications.

In summary, the Procom QN300RYLA-W, QN300RYLA, QL300RYLA-W, and QL300RYLA antennas deliver exceptional performance, robust design, and versatility for a myriad of communication scenarios. With their advanced technology and user-centric features, these antennas are well-suited to meet the evolving demands of modern communication needs.
Top Page Image Contents