16.If necessary, press the Left Tray (103) and the Right Tray (104) into the console assembly.
17.Raise the Frame (55) to the position shown.
Have a second person hold the Frame until this step is completed.
Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the Latch Bracket (6) and Storage Latch (51) to the Base (95) with two 3/8" x 2" Bolts (8) and two 3/8" Nuts (10).
Attach the upper end of the Storage Latch (51) to the bracket on the Frame (55) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the bracket.
Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 24).
16 | 103 | Console |
| ||
| Assembly | |
|
| 104 |
17 | 55 |
|
|
| |
10 | 8 |
|
Latch Knob | 51 |
|
Large | ||
| Barrel | |
| 6 | 95 |
| 10 | 8 |
|
| |
18.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 26 and 27).
14
