10.Slide the Right Upright Cover (86) onto the Right Upright (85). Remove the tie from the bracket on the Right Handrail (83). If necessary, press the 5/16" Cage Nut (38) back into place. Hold the Right Handrail (83) near the Right Upright (85). Insert the Upright Wire (87) through the bracket on the bottom of the Right Handrail. Pull the Upright Wire out of the end of the Right Handrail.
Attach the Right Handrail (83) to the Right Upright (85) with two 5/16" x 1" Flat Head Patch Bolts (14), a 5/16" x 1" Patch Bolt (4), and a 5/16" Star Washer (13) as shown. Do not tighten the Patch Bolts yet.
11.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Remove the two #8 x 3/4" Screws (1). Lift off the Crossbar (107).
10 | 87 |
|
|
|
|
| |
14 | Bracket | 38 |
|
| 4 | ||
| 13 | ||
|
| ||
83 |
|
| |
|
|
| |
|
| 86 |
|
|
| 85 |
|
11 | 1 | 107 |
|
Console |
| ||
|
|
| |
Assembly |
|
|
|
11
