HOW TO USE AN IFIT WORKOUT
To purchase iFit cards at any time, go to www.iFit.com or call the telephone number on the front cover of this manual. iFit cards are also available at select stores.
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 18.
2.Insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the iFit slot; make sure that the iFit card is oriented so the metal contacts are
| iFit Slot |
iFit Card | iFit Logo |
|
Next, select an iFit workout by pressing the iFit in- crease and decrease buttons next to the iFit slot. When an iFit workout is selected, the workout du- ration, the maximum incline setting, the name, and the maximum speed setting of the workout will ap- pear in the displays. In addition, a profile of the speed settings of the workout will scroll across the matrix.
Each iFit workout is divided into several one- minute segments. One speed setting and one in- cline setting are programmed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments.
3.Start the walking belt.
Press the Go button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking.
During the workout, the voice of a personal trainer will guide you through the workout.
If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- ride the setting by pressing the Speed or Incline buttons; however, when the next segment be- gins, the treadmill will automatically adjust to the speed and incline settings for the next seg- ment.
To stop the workout at any time, press the Stop button. To restart the workout, press the Go button or the Speed increase button. The walking belt will begin to move at 2 Km/H. When the next segment of the workout begins, the treadmill will automati- cally adjust to the speed and incline settings for the next segment.
4.Monitor your progress with the matrix and the displays.
See step 5 on page 19.
5.Measure your heart rate if desired. See step 6 on page 20.
6.When you are finished exercising, remove the key from the console.
See step 7 on page 20.
CAUTION: Always remove iFit cards from the iFit slot when you are not using them.
22
