4. With the help of a second person, carefully raise the | 4 | |
Uprights (71) until the treadmill is in the position | ||
| ||
shown. |
| |
| 71 | |
5. Attach the Frame Guide (5) and the two Frame Guide | 5 | |
Spacers (116) to the left side of the Frame (1) with two | ||
| ||
Small Screws (4) as shown. Be careful not to over- |
| |
tighten the Screws. Make sure that the thick end of |
| |
the Frame Guide is at the bottom. |
|
Note: If it is difficult to fold or lower the treadmill, remove one or both of the Frame Guide Spacers (116).
| 5 |
|
|
| 4 | 116 | 1 |
| Thick End | ||
|
|
| |
6. Remove the backing from the Adhesive Clip (98). | 6 |
|
|
Press the Adhesive Clip onto the base of the Uprights |
|
| |
|
|
| |
(71) in the indicated location. Press the Allen Wrench |
|
|
|
(99) into the Adhesive Clip. |
|
|
|
| 71 | 98 | 99 |
6.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. To order a mat, see the back cover of this manual.
6
