WINTER USE AND CARE
The hydrotherapy spa is designed for
1.Drain the spa (see DRAINING THE HYDROTHERAPY SPA on pages 17 and 18).
2.Remove all remaining water from the spa shell. Dry the spa shell with towels.
3.Set the air control on the console to the lowest setting. Use a wet/dry vacuum to pull any remain- ing water from the system. To do this, place the vacuum nozzle over each
4.Set the air control on the console to the highest setting and repeat step 3.
5.Drain the pump (see DRAINING THE PUMP on page 18). Once the water has drained from the pump, place the vacuum nozzle over the drainage hole in the pump and vacuum any addi- tional water from the pump. Note: For additional protection you can remove the pump/motor from the spa to store it in a climate controlled room.
6.Clean the spa shell (see page 16).
7.Clean the filter (see page 16).
8.A qualified electrician should disconnect the power cord from the 240 volt power source.
9.
19