![](/images/new-backgrounds/1322404/32240415x1.webp)
5. Apply a small amount of grease to the axle on | 5 |
|
|
the right Crank Arm (36) and to a Wave Washer |
|
| |
|
|
| |
(93). Then, slide the Wave Washer onto the |
|
|
|
Crank Arm. |
|
|
|
Also, apply a small amount of white grease, |
|
|
|
which is marked with a “For Wheels” sticker, to |
|
|
|
the Roller (22) on the Right Roller Leg (21); |
|
|
|
spread the grease evenly around the Roller. |
|
| 36 |
|
|
| |
Slide the Right Roller Leg (21) onto the axle on |
|
| 93 21 |
the right Crank Arm (36) and set the Roller (22) |
|
|
|
on the Base (1). Attach the Right Roller Leg with |
|
| 30 |
an M10 x 23mm Shoulder Screw (80), an M10 x |
|
| |
|
| Grease | |
20mm x 2mm Washer (81), and a Crank Axle |
|
|
|
Cap (30). |
|
| 81 80 |
|
|
| |
Repeat this step for the other side of the | 1 | Grease |
|
elliptical exerciser. |
|
|
|
| 22 |
|
|
6. Attach the Center Frame Cover (27) to the Base | 6 |
|
|
(1) with six M4 x 12mm Flange Screws (73). |
|
| |
|
|
| |
|
|
| 73 |
|
| 27 |
|
|
| 73 |
|
|
| 1 | 73 |
| 8 |
|
|