![](/images/new-backgrounds/1322404/32240419x1.webp)
10.Identify the Right Handlebar (9), which is marked with an “R” sticker. Insert the Right Handlebar into one of the Handlebar Legs (11) as shown.
Attach the Right Handlebar (9) with two M8 x 42mm Button Bolts (71) and two M8 Nylon Locknuts (96). Make sure that the Nylon
Locknuts are inside the hexagonal holes.
Repeat this step for the Left Handlebar (not shown) and the other Handlebar Leg (not shown).
10
| 9 |
| 96 |
71 | Hexagonal |
Holes |
11
11.Orient an Inner Handlebar Cover (18) and an Outer Handlebar Cover (19) around the Right Handlebar (9) as shown.
Attach the Outer Handlebar Cover (19) with an M4 x 16mm Flange Screw (84). Then, attach the Inner Handlebar Cover (18) with two M4 x 16mm
Repeat this step for the Left Handlebar (not shown).
11
79 9
18 84
19
10