ProForm PCTL55810 user manual HOW to USE the Manual Mode, Time/Incline/Seg, CALS./FAT Cals

HOW TO USE THE MANUAL MODE

1	Insert the key fully into the console.
	See HOW TO TURN ON THE POWER on page 10.
	Select the manual mode.
2
	When the key is in-
	serted, the manual
	mode will automatically
	be selected and the
	manual control indica-
	tor will light. If a pro-
	gram has been selected, press the PROGRAM
	button repeatedly to select the manual mode.
	Press the START button or the SPEED			▲ button
3
	to start the walking belt.
	A moment after the button is pressed, the walking
	belt will begin to move at 1 mph. Hold the handrails
	and carefully begin walking.
	As you exercise,
	change the speed of
	the walking belt as de-
	sired by pressing the
	SPEED	▲ and	▼ but-

tons. Each time a but-

ton is pressed, the speed will change by 0.1 mph. If a button is held down, the speed will change in in- crements of 0.5 mph. To change the speed setting quickly, press the QUICK SPEED buttons. Note: After the buttons are pressed, it will take a moment for the treadmill to reach the selected speed setting.

To stop the walking belt, press the STOP button. The TIME/INCLINE/SEG. TIME display will begin to flash. To restart the walking belt, press the

START button or the SPEED ▲ button.

During the first few minutes that you use the tread- mill, inspect the alignment of the walking belt, and align the walking belt if necessary (see page 18).

4 Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the

INCLINE buttons. Each time a button is pressed, the incline will

change by 0.5%. The

buttons can be held down to change the incline rapidly. Note: After the buttons are pressed, it will take a moment for the treadmill to reach the se- lected incline setting.

5	Follow your progress with the LED track and
	the four displays.
	The LED Track	—
	The LED track
	represents a dis-
	tance of 1/4 mile
	(400 m). As you
	exercise, the indi-
	cators around the

track will light in sequence until you have com- pleted 1/4 mile. A new lap will then begin.

DISTANCE/LAPS dis-

play —This display showsArrow the distance that you have walked or run and the number of laps you

have completed. The dis-

play will alternate between one number and the other every few seconds, as shown by the arrows in the display.

TIME/INCLINE/SEG.
TIME display		—When the
manual mode is selected,
this display will show the
elapsed time and the in-
cline level of the treadmill.
Every few seconds, the display will change from
one number to the other, as shown by the arrows
in the display. When a personal trainer program is
selected, the display will show the				time remaining
in the program, the incline level of the treadmill, and
the time remaining in the current segment of the
program.
CALS./FAT CALS./
HEART RATE display			—
This display shows the
approximate numbers of
calories	and	fat calories
you have burned (see Fat
Burning on page 19). The
display will change from one number to the other
every few seconds, as shown by the arrows in the
display. The display will also show your heart rate
when the pulse sensor is used (see step 6 on
page 12).
SPEED/MIN-MILE dis-
play —This display shows
the speed of the walking
belt and your current
pace (pace is measured
in minutes per mile		). The

display will change from one number to the other every few seconds, as shown by the arrows in the display.