HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAU-
TION: You must be able to safely lift 20 kg (45 lbs.) in order to raise, lower, or move the treadmill.
1.Hold the treadmill with your hands in the locations shown at
the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you
raise the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the vertical position.
2.Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the treadmill until the latch pin is aligned with the hole in the catch. Insert the latch pin into
the catch. Make sure that the latch pin is fully inserted into the catch.
To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage position in temperatures above 30° C (85° F).
1 |
|
2 | Open |
Latch | Closed |
Knob |
|
Pin |
|
Catch |
|
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above.Make sure that the latch pin is fully inserted into the catch.
1.Hold the handrails as shown and place one foot against a wheel.
2.Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. | Never |
move the treadmill without tipping it back. To reduce |
|
the risk of injury, use extreme caution while moving the |
|
treadmill. Do not attempt to move the treadmill over an |
|
uneven surface. |
|
3.Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.
