ProForm PCTL69100 user manual Problem The walking belt slows when walked on, Unplug the Power Cord

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-

come damaged. Remove the key andUNPLUG THE

POWER CORD . Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7-

10 cm (3-4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power

cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tight- ened.

b	7-10 cm
Rear Roller Adjustment Bolts

c. If the walking belt still slows, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt is off-centre or slips when walked on
SOLUTION:	a. If the walking belt is off-centre, first remove the key						a
	and	UNPLUG THE POWER CORD		. If the walking
	belt has shifted to the left,			use the allen wrench to
	turn the left rear roller bolt clockwise 1/2 of a turn;				if
	the walking belt has shifted to the right,				turn the
	bolt counterclockwise 1/2 of a turn. Be careful not to
	overtighten the walking belt. Plug in the power cord,
	insert the key and run the treadmill for a few minutes.
	Repeat until the walking belt is centred.
	b. If the walking belt slips when walked on, first remove					b
	the key and		UNPLUG THE POWER CORD		. Using
	the allen wrench, turn both rear roller adjustment
	bolts clockwise, 1/4 of a turn. When the walking belt
	is correctly tightened, you should be able to lift each
	side of the walking belt 7-10 cm (3-4 in.) off the walk-
	ing platform. Be careful to keep the walking belt cen-
	tred. Plug in the power cord, insert the key and care-
	fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT CDs and
	videos are played
SOLUTION:	a. With the key in the console, press one of the Incline buttons.						Whilst the incline is changing, re-
	move the key.		After a few seconds, re-insert the key. The treadmill will automatically rise to the
	maximum incline level and then return to the minimum level. This will recalibrate the incline.