ProForm PETL41106.0 HOW to Connect Your VCR, HOW to USE AN Ifit MP3, CD, or Video Program

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 19.

A. Plug one end of a long 3.5 mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the AUDIO OUT jack on your VCR.

A

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH 3 4

OUT

AUDIO OUT

RIGHT

LEFT

Audio Cable

B. Plug one end of a long 3.5 mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT jack on your VCR.

HOW TO USE AN IFIT MP3, CD, OR VIDEO PROGRAM

To use an iFIT MP3, CD, or video program, you must connect the treadmill to your MP3 player, CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO USE IFIT PROGRAMS on pages 18 to 20. To down- load iFIT MP3 programs, go to www.iFIT.com. To purchase iFIT CDs or videocassettes, call the tele- phone number on the front cover of this manual.

Follow the steps below to use an iFIT MP3, CD, or video program.

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

2 Select the iFIT mode.

To select the iFIT mode, press the iFIT button. The letters “iFIT” will appear below the matrix in the display.

Press the Play button on your MP3 player, CD

3 player, or VCR.

Note: If you are using an iFIT CD, insert the CD into your CD player; if you are using an iFIT video- cassette, insert the videocassette into your VCR.

A moment after the Play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions. Note: If the time is flashing in the dis- play, press the Start button or the Speed increase

B

Audio Cable

ANT. IN

VIDEO AUDIO

IN

RF OUT

CH 3 4

OUT

RCA

Y-adapter

button on the console. The treadmill will not re- spond to an MP3, CD, or video program while the time is flashing in the display.

During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the

Wire removed from AUDIO OUT jack

speed and/or incline may change before your personal trainer describes the change.

20