11. Apply a generous amount of grease to the axle | 11 |
|
|
|
|
on the Right Upper Body Arm (37) and to the |
|
|
|
| |
right Crank Arm (31). |
| 37 |
|
|
|
Apply a small amount of grease to two 19mm |
|
|
|
| |
Wave Washers (71). Slide one Wave Washer |
| Grease |
|
|
|
onto the Right Upper Body Arm (37); slide the |
|
|
|
| |
other Wave Washer onto the right Crank Arm |
| 71 |
|
|
|
(31). |
|
|
|
| |
Identify the Right Pedal Leg (38) and Right Link |
|
|
| 52 | 46 |
Arm (39) assembly, which is marked with an “R” | 31 | 39 | |||
sticker. Orient the assembly as shown. |
|
| |||
At the same time and with the help of another |
|
| 52 |
|
|
person, slide the Right Pedal Leg (38) onto the |
|
| 46 | 58 | |
Right Upper Body Arm (37) and slide the Right |
| 38 |
| ||
Link Arm (39) onto the right Crank Arm (31). |
|
|
|
| |
Attach the Right Pedal Leg (38) and the Right |
|
|
|
|
|
Link Arm (39) with two M10 x 20mm Patch |
|
|
|
|
|
Screws (58), two Axle Covers (46), and two M10 |
|
|
|
|
|
x 25mm Washers (52). |
|
|
|
|
|
Repeat this step for the other side of the |
|
|
|
|
|
elliptical exerciser. |
|
|
|
|
|
12.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
11
