7.Note: For clarity, the Left and Right Handlebars (22, 36) are not shown. While another person holds the Console (4) near the Upright (3), connect the console wire to the Wire Harness (73). Then, connect the con- troller wire marked with an “R” tag to the Right Extension Wire (83), which is also marked with an “R” tag. Connect the other controller wire to the Left Extension Wire (86). Insert the excess wire downward into the Upright.
Tip: Avoid pinching the wires during this step. Attach the Console (4) to the Upright (3) with four M4 x 19mm Screws (75).
8.Tighten the three Feet (9) into the underside of the Track (2).
Orient the Track (2) and the Track Cover (7) as shown. Attach the Track Cover to the Track with four M4 x 50mm Screws (76).
7 |
|
|
| 4 |
|
| Controller Wires | |
| 83 | 86 |
Console Wire | 3 | |
73 | 75 | |
|
| |
Avoid pinching | 75 | |
| ||
the wires during |
| |
this step |
|
|
8 |
| 7 |
|
| |
|
| 9 |
9 |
| 2 |
|
| |
| 76 | 9 |
|
|
9
