ProForm PFEL95918.0 manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the
included hex keys, assembly requires a Phillips screwdriver			, two adjustable
wrenches	, and a rubber mallet	.

As you assemble the elliptical exerciser,use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre- assembled. If a part is not in the hardware kit, check to see if it has been preassembled.

M8 Locknut	16mm Wave	19mm Wave	M8 x 25mm		M10 x 25mm
(68)–4	Washer (66)–4	Washer (71)–4	Washer (54)–8		Washer (52)–4
M4 x 16mm	M4 x 19mm	M4 x 35mm			M4 x 50mm
Screw (72)–8	Screw (75)–4	Screw (74)–2			Screw (76)–4
M8 x 16mm Patch		M8 x 25mm Patch			M8 x 40mm Button
Screw (53)–5		Screw (77)–6			Screw (67)–4
M8 x 50mm Patch		M10 x 20mm Patch		M10 x 35mm Shoulder
Screw (65)–2
		Screw (58)–4			Screw (57)–2

5