5.Hold the Console (9) near the Handlebar Post (6). Connect the wire harness on the Console (9) to the Upper Wire Harness (16). Then, insert the wire har- nesses into the Handlebar Post.
Attach the Console (9) to the Handlebar Post (6) with four M4 x 16mm Screws (21). Be careful to avoid pinching the wire harnesses.
Attach the Bottle Holder (69) to the Handlebar Post
(6) with two M4 x 21mm Screws (81). Note: The bottle holder is designed to be used with your own bottle.
6.Attach the Seat (12) to the Seat Carriage (11) with four 1/4” x 16mm Hex Screws (29) and four M8 Flat Washers (18).
7.Attach the Right Seat Handle (31) to the Seat Carriage (11) with two M8 x 19mm Button Bolts (43) and two M8 Nylon Locknuts (56).
Attach the Left Seat Handle (14) to the Seat Carriage (11) in the same way.
5 |
|
|
21 |
|
|
16 | Wire |
|
| Harness | 9 |
|
| |
69 |
|
|
6 |
|
|
| 81 |
|
6 |
|
|
|
| 12 |
11 |
|
|
18 |
|
|
29 |
|
|
7 |
|
|
14 |
|
|
|
| 31 |
11 |
|
|
56 |
|
|
| 43 |
|
7
