ProForm PFSY3415.0 user manual Engage the VKR Pin 101 into the VKR Frame Upright Grease

6. Slide three M6 Washers (78) onto three M6 x	6
140mm Screws (79) and insert the Screws into
the Upright (3) through the indicated holes.
Orient the VKR Bumper (95) with the wide end on
top. Attach the VKR Bumper to the Upright (3)
with two M4 x 16mm Screws (70).
Attach the VKR Pin (101) to the Upright (3) with
an M4 x 16mm Screw (70).	79
		Wide
Set the Shroud (13) onto the Base (1). Attach the	78	End
Bottom Cover (14) and the Shroud to the Base		70
with two M4 x 16mm Screws (70).		95
	3	101
		13
	79
	78	70
		70
		14
		70
		1
7. Grease the M10 x 168mm Button Bolt (99).	7
Attach the VKR Frame (82) to the Upright (3) with
the Bolt and an M10 Nylon Locknut (73). Do not
overtighten the Locknut; the VKR Frame must
be able to pivot easily.
Engage the VKR Pin (101) into the VKR Frame
(82) and the Upright (3).
		82
		73
		Grease
	3	99
		101

8