24.Attach the Seat (19) and the Seat Base (91) to the Seat Frame (6) with two M6 x 25mm Screws (60), an M6 x 87mm Screw (68), and an M6 Washer (78).
Hook the Seat Frame (6) onto the Upright (3) at the indicated location.
25.Attach the Bumper (49) to the Leg Lever (7) with an M4 x 16mm Screw (70).
Apply grease to an M10 x 71mm Bolt (67). Attach the Leg Lever (7) to the Seat Frame (6) with the Bolt and an M10 Nylon Locknut (73). Do not overtighten the Bolt; the Leg Lever must be able to pivot easily.
26.Slide two Foam Pads (21) onto the Seat Frame
(6).
Slide a Pad Tube (20) through a hole in the Leg Lever (7). Slide two Foam Pads (21) onto the Pad Tube.
27.Slide an Arm Pad Base (83) and an Arm Pad (84) onto the VKR Frame (82). Attach the Arm Pad and Base to the Frame with two M6 x 73mm Screws (103) and two M6 Washers (78).
Repeat this step on the other side of the VKR Frame (82).
24 | 19 |
|
|
|
|
| |
91 |
|
|
|
6 |
|
| 3 |
78 | 60 |
| |
| 68 |
| |
|
|
| |
25 |
|
|
|
Grease | 6 |
|
|
67 |
|
|
|
73 |
|
| |
7 |
| 70 |
|
|
| 49 |
|
26 |
|
|
|
|
| 6 |
|
| 21 |
|
|
|
| 7 | 21 |
21 |
|
| |
|
|
| |
20 |
| 21 | |
|
|
| |
27 |
|
|
|
|
|
| 84 |
|
| 103 | 83 |
|
|
| 78 |
|
|
| 103 |
|
|
| 82 |
13
