10.Set the console assembly on the Left and Right Uprights (82, 83). Be careful not to pinch any wires. Insert the excess wire into the Right Upright.
Start two 5/16" x 3/4" Screws (5) with two 5/16" Star Washers (9) into the Right Upright (83). Then start a 5/16" x 1 1/2" Bolt (4) into the Right Upright.
Repeat this step on the left side of the tread- mill. Then, firmly tighten all four 5/16" x 3/4" Screws (5) and both 5/16" x 1 1/2" Bolts (4).
11.See steps 4 and 5. Tighten all Screws used in these steps.
Attach the Left Accessory Tray (101) and the Right Accessory Tray (104) to the console as- sembly with eight #8 x 1/2" Screws (1).
10 |
| Console |
|
|
|
| Assembly |
|
|
|
|
|
| 4 |
4 | 9 | 5 | 5 | 9 |
|
|
| ||
| 83 |
|
| 82 |
11 |
| Console | |
|
| Assembly | |
|
| 101 | |
|
| 104 | |
1 |
| 1 | |
1 | 1 | ||
|
12
