2.Attach a Wheel (95) to the Base (94) with a 3/8" x 3" Bolt (67), two Wheel Spacers (96), and a 3/8" Nut (10). Do not overtighten the Nut; the
Wheel must turn freely.
3.Identify the Right Upright (83), which is marked with a “Right” sticker. Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie in the Right Upright (83) securely around the end of the Upright Wire (85). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright.
2 | 67 | |
96 | ||
| ||
95 | 94 | |
10 | ||
96 |
|
3 |
| 83 |
|
| |
85 | Wire Tie | 85 |
| ||
|
| |
|
| 94 |
| 83 |
|
85 | Wire |
|
Tie |
|
8
