HOW TO PLUG IN THE POWER CORD
DANGER: Improper connection of the equipment-grounding conductor in- creases the risk of electric shock. Check with a qualified electrician or serviceman if you are unsure whether the product is properly grounded. Do not modify the plug—if it will not fit the outlet, have a proper outlet in- stalled by a qualified electrician.
Your treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your homeʼs power. To decrease the risk of damaging your treadmill, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see precaution 12 on page 3. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly-functioning surge suppressor could dam- age the control system of the treadmill (see precau- tion 13 on page 3).
This product must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec- tric shock. This productʼs power cord has an equip- ment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accor- dance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped outlets.
This product is for use on a nominal 120-volt circuit |
(see drawing 1). A temporary adapter may be used to |
connect the surge suppressor to a 2-pole receptacle if |
a properly-grounded outlet is not available (see |
drawing 2). | | |
1 | Grounded Outlet Box |
| | | Surge Suppressor |
| | | Grounding Pin |
| Grounding Pin |
2 | Grounded Outlet | | Grounding Plug |
Grounded Outlet Box |
| Adapter | Surge Suppressor |
| Lug | Grounding Plug |
| Metal Screw |
The temporary adapter should be used only until a properly-grounded outlet (see drawing 1) can be in- stalled by a qualified electrician.
The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly-grounded outlet box cover. The adapter must be held in place by a metal screw.
Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified electrician to deter- mine if the outlet box cover is grounded before using an adapter.
