4. PERSONALISATION

4.1 ADJUSTING SPEAKER VOLUME

There are two ways to set the speaker volume:

4.1.1 Speaker volume during call

During conversation, press the or key to change the volume accordingly
(1-5). Press OK to confirm.
Note: The handsfree volume is also adjusted together with the receiver in the handset as
described above!

4.2 ADJUSTING RING VOLUME

4.2.1 Handset ring

You can adjust the ring volume during a incoming call by pressing the Up or
Down keys. The default ring volume can be set as follows:
1.Enter the menu by pressing MENU.
2.Select HANDSET using the and keys.
3.Press OK.
4.Select VOLUME using the and keys.
5.Press OK.
6.Select the desired volume OFF or 1 to 5).
7.Press OK to confirm or to return to the previous menu.
Note: Every setting is confirmed at the end by a double or single long beep. A double bleep
confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.

4.2.2 Base ring

1.Enter the menu by pressing MENU.
2.Select BASE.
3.Press OK.
4.Select UNPROTEC.
5.Press OK.
6.Select VOLUME.
7.Press OK.
8.Select the desired volume (OFF or 1 to 5) by means of the Up and Down
keys.
9.Press OK to confirm or to return to the previous menu.
A double bleep confirms the validation of your choice.
A long bleep that the modification has not been taken into account.
ENGLISH
73
Cocoon 400
HANDL. C400_euro.qxd 27-08-2002 09:25 Page 73