To adjust the volume, refer to the chapter “ Personalisation “- adjusting speaker
volume.
3.6 INTERNAL CALL TRANSFER
Only possible when more than one handset is registered to the base!!
When you want to transfer an external call to another handset:
1.During a conversation press INT.
2.Select the number of the internal handset, the external caller is put on hold.
3.When the other handset picks up, press to hang up and transfer the call.
If the internal corespondent does not pick-up, press INT again to reconnect to the
external caller.
3.7. CONFERENCE CALL
Only possible when more than one handset is registered to the base!!
You can converse simultaneously with an internal and external correspondent .
When you are on line with an external correspondent:
1.Press INT.
2.Enter the number of the internal handset that you want to call.
3.When the internal correspondent picks up, press and hold #.
4.If the internal correspondent does not answer, press INT again to reconnect to
the external correspondent.
3.8 DISPLAY OF CALL DURATION
The communication duration is displayed after 10 seconds, in minutes - seconds:
“00-15”. During the call you can still see the dialled number by pressing the
MENU key for 2 seconds.
At the end of each call, the duration of communication is displayed for 5 seconds.
You can turn the timer ON or OFF (see 4.10 Call duration timer ON/OFF)
3.9 MICROPHONE MUTE
It is possible to mute the microphone during a conversation.
Press during the conversation, the microphone is then deactivated, you can talk
freely without being heard by the calling party.
The -icon is displayed.
Press again to return to normal mode.
3.10 PAUSE KEY
When you press and hold the digit, a pause will be added after the digit. A ‘P’ will
be shown on the display.
ENGLISH
69
Cocoon 400
HANDL. C400_euro.qxd 27-08-2002 09:25 Page 69