21.With the help of a second person, hold the TV assembly near the console assembly, and con- nect the wires.
Attach the TV assembly to the back of the con- sole assembly with four 1/4" x 3/4" Screws (116).
Be careful not to pinch any wires. Start all four Screws, and then tighten them.
21 | TV Assembly |
| |
| Console |
| Assembly |
| Wires |
| 116 |
22.Place the treadmill near the coaxial cable from your wall (or device). Connect the coaxial cable to the Upright Coaxial Cable (122).
Press the Right Base Cover (83) and the Left Base Cover (not shown) onto the Base (94) until they snap into place.
22 |
83 |
94 |
122 |
23.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 39 and 40).
16
