18. Attach the Rear Feet (57) to the Frame (56) as | 18 |
| |
shown with four #8 x 3/4" Screws (2). |
| ||
|
| ||
Lower the Frame (56) (see HOW TO LOWER |
|
| |
THE TREADMILL FOR USE on page 37). | 57 |
| |
| 57 | ||
|
| ||
| 2 | 2 | |
|
| ||
| 56 |
| |
19. Press the Grommet (77) into the square hole in | 19 |
| |
the Base (94). |
| ||
|
| ||
|
| 94 | |
|
| 77 | |
20. Remove the #8 x 1/2" Machine Screw (114) and | 20 |
| |
the Wire Cover (117) from the TV Bracket (118). | 115 | ||
| |||
With the helpf of a second person, hold the TV |
|
| |
(119) near the TV Bracket (118) and insert the |
|
| |
wires from the TV down through the indicated |
| 115 | |
Cable Tie (99). |
| ||
119 |
| ||
Attach the TV (119) to the TV Bracket (118) with |
| ||
Wires |
| ||
four M4 x 12mm Screws (115). Start all four |
| ||
Screws before tightening them. | 117 |
| |
Carefully pull the wires tight, and then tighten the |
| ||
114 |
| ||
Cable Tie (99) around the wires. | 99 | ||
118 | |||
| |||
1/2" Machine Screw (114). |
| ||
|
| ||
| 15 |
|
