HOW TO CONNECT A VCR, DVD PLAYER, OR OTHER DEVICE USING AN AV CABLE

1.Connect the three-pronged end of an RCA AV Cable to your VCR, DVD player, or other device.

2.Plug in the power cord of your device. See your VCR, DVD player, or other device’s user’s manual for proper grounding instructions.

3.Connect the RCA AV Cable to the audio/video input jack on the 15" digital TV as shown below.

4.To use the tie blocks, see step 4 at the right.

Note: Only use the tie blocks after you have connected all desired cables.

AV Cable

HDMI

Connectors

Cable

 

Tie

 

Blocks

 

HOW TO CONNECT A DVD OR BLU-RAY PLAYER OR OTHER DEVICE USING AN HDMI CABLE

1.Connect one end of an HDMI Cable to your DVD or Blu-ray player or other device.

2.Plug in the power cord of your device. See your DVD or Blu-ray player or other device’s user’s manual for proper grounding instructions.

3.Connect the other end of the HDMI Cable to the HDMI input jack on the 15" digital TV as shown at the left.

4.If desired, apply the included tie blocks as shown at the left. First, remove the paper covering the adhesive on the back of a tie block. Then, apply the adhesive on the tie block in the location desired. Wrap one of the included zip ties through the tie block and around the wires. Then, pull the zip tie on the tie block to secure the wires. Cut the end of the zip tie. Repeat this step with as many tie blocks as desired.

IMPORTANT: Do not plug any devices into the USB port on the side of the 15" digital TV.

20

Page 20
Image 20
ProForm PFTL20511.0 user manual Hdmi