2.Attach six Base Pads (125) (only four are shown) to the bottom of the Base (131) with six 1” Tek Screws (126).
With the help of another person, carefully tip the treadmill down so the Base Pads (125) are resting on the floor.
3.Attach a Wheel (136) to the right side of the Base (131) with a Wheel Bolt (134) and a Wheel Nut (135) as shown.
Attach a Wheel (not shown) to the left side of the Base (131) in the same way.
4.Attach the Latch Assembly (110) to the Left Upright (111) with the two 3/4” Screws (33). Be careful not to overtighten the Screws. Note: It may be necessary to remove the Screws from the Left Upright before begin- ning this step.
2 |
126 |
125 |
125 |
126 |
126 |
125 |
131 |
3 |
131 |
135 |
134 |
136 |
4 |
111 |
110 |
33 |
7
