ProForm PFTL97908.0

12. Raise the Frame (56) to the position shown.

Have a second person hold the Frame until

this step is completed.

Orient the Storage Latch (53) so that the large

barrel and the Latch Knob (54) are in the posi-

tions shown.

Attachthe Latch Bracket (14) and theStorage

Latch(53) to the Base (83) with two 3/8" x 2"

Bolts (4) and two 3/8" Nuts (8).

Attach the upper end of the Storage Latch (53)

to the bracket on the Frame (56) with a 3/8" x 2"

Bolt (4) and a 3/8" Nut (8). Note: It may be nec-

essary to move the Frame back and forth to

align the Storage Latch with the bracket.

Lowerthe Frame (56) (see HOW TO LOWER

THE TREADMILLFOR USE on page 21).

Large

Barrel

11. Identify the Storage Latch (53). Remove the tie

from the end of the tube. Make sure that the

sleeve has been slid over the indicated hole and

that the Latch Knob (54) is locked into the hole.

Pull on the sleeve to make sure that it is

locked into place.

Sleeve

Hole

Tube

10. Attach the console assembly with six 5/16" x 1

1/4" Bolts (7) and six 5/16" Star Washers (10)

(only three are shown).

See steps 4 and 6. Tighten the 3/8" x 5" Bolts

(6).

Console

Assembly