Profoto Studio Software, Digital Wireless Freedom Radio Slave

D4 Profoto D4 – Digital Wireless Freedom

Digital Wireless Freedom (Radio Slave)

Profoto D4 generators are available as D4R version with an integrated PocketWizard

32 channel/4 sub channel radio receiver for wireless synchronization from a distance up to 100m via digital encoded radio signals. This receiver is compatible with dedicated Sekonic® flashmeters and PocketWizard® transmitters and transceivers.

The PocketWizard Plus transmitter (4 channels) for wireless synchronization is available through Profoto.

. Digital Wireless Freedom offers:

.Studio or on-location shoots without unreliable and disturbing PC cords. A light meter that wirelessly triggers all or only selected electronic

.flash units and measures the light simultaneously, can even trigger a camera.

.A handy solution for triggering cameras, flash units or both simultaneously from behind a camera or from a remote location.

All this wireless technology built into your photo equipment, ready for you to control remotely.

Visit www.pocketwizard.com for further information.

PLEASE NOTE!The DWF system is available in two different versions:

I.344MHz (USA)

II. 433MHz (Europe)

If you are in any doubt about the frequency allowed in your country, please get in contact with the local Profoto distributor BEFORE you activate the radio slave transmitter. It is strictly forbidden by law to use these frequencies in other countries and it is impossible to use both versions in combination.

To check the frequency of the integrated radio mod- ule, unplug the D4 generator when activated, than re-plug it: For three seconds you can see the fre- quency in the Auxiliary Functions Display [8].

If no receiver module is integrated, the display shows “no r”.

Profoto D4 – Profoto Studio Software D4

Profoto Studio Software

Each Profoto D4 generator is prepared for the “Profoto Studio” software. This software makes it easy to adjust all functions remotely and allows the direct and uncomplicated control of big set-ups using a huge number of D4 generators. The unique “Group” function can be used to form and control different groups of D4’s, i.e. used for the background or to power a big light bank, like seperate generators. It is possible to store an almost unlimited number of set-ups in the computer memory, which allows the photographer to quickly repeat even the most complex set-ups.

The structure of the “Profoto Studio” software closely emulates the top panel of the generator and is very easy to use. Nevertheless we recommend some practice before you start to seriously use this software in the studio.

System Requirements

The “Profoto Studio” software runs on all Macintosh computers under Mac OS X. The USB 1 connection to the D4 generators is also USB 2 compatible. It is possible to control up to 127 D4 generators via one computer.

Installation

1.Insert the CD with the “Profoto Studio” software into your computer’s CD drive.

2.Double click the CD symbol with the Profoto logo.

3.Save the two .pkg files on the CD to the hard drive.

4.Double click the file “FTDIUSBSerialDriver.pkg” to install the driver. You’ll need the password of the owner account to install it!

5.Restart the computer.

6.Double click the file “Profoto Studio.pkg” to install the application. You’ll need the password of the owner account to install it!

Please Note! The application will be placed in the “Applications folder”. If not relocated at installation, in the “Profoto Studio” folder.

7.The two .pkg files can now be trashed, since they are not needed anymore (optional).

8.Restart the computer.

9.After the restart has finished, connect the Profoto D4 generator(s) to the Mac via USB cable(s).

10.Start the “Profoto Studio” software by double clicking the “Profoto Studio” icon located in the “Profoto Studio” folder under “Applications”.

Profoto

The Light Shaping Company